 |
|
Reverse Osmosis Drinking Water Systems |
| This is one of our many Reverse Osmosis Systems. We offer systems ranging from
Residential to Industrial. Whatever you're looking for...Water Pro has the solution. |
Common Drinking Water Problems |
| Contaminants |
Water for drinking, beverages and preparing foods should be safe and free from harmful contaminants. This is particularly important if you get your water from a private well. And even if your municipal water meets all standards, it may contain other impurities that could be responsible for long term health effects. |
| Bottled Water |
If you think bottled water is the answer, THINK AGAIN!
Many individuals are buying bottled water because they are concerned about drinking water quality. Bottled water is expensive and it's very inconvenient. Water produced by Reverse Osmosis systems cost pennies per GALLON, compared to a dollar or more for bottled water. |
|
|
 |
Reverse Osmosis Drinking Water Systems Specifications
| AquaPro Model | PRO-Q-75 |
| Booster Pump Standard with unit |
No |
| Membrane Rating * |
|
| Membrane Production |
75 + 7 gallons per day |
| Membrane T.D.S. Reduction |
|
| Maximum Incoming Water Specifications |
|
| Water Pressure ** |
40-125psi |
| T.D.S. |
Less than 2000 ppm |
| Temperature |
40-125 degrees Farenheit |
| pH |
5-10 |
| Hardness |
Less than 10 gpg |
| Iron |
Less than .1ppm |
| Manganese |
Less than .05ppm |
| Hydrogen Sulfide |
None |
| Chlorine *** |
None |
| Bacteria **** |
Water source must be potable |
|
| * Measured at Industry Standard condition of 60psi, 77 degree F, 500ppm T.D.S., and discharging to atmosphere. |
| ** Actual capacity measured at 50psi, 50 degree F, and 325 ppm T.D.S |
| *** Chlorine will damage a T.F.M. Membrane. The Carbon Prefilter cartridge will remove chlorine from the incoming water. |
| **** Do not use these systems where the feed water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit. |
Play Water Pro Jingle